|
|
|||||
|
|||||
|
|||||
|
Shock Accessories |
|||||
|
|
|||||
|
Coil Over Kits |
|||||
|
|
|||||
|
|||||
|
|||||
|
|||||
|
|
|||||
|
Coil Over Kits - Steel Shocks |
|||||
|
|
|||||
|
|||||
|
|
|||||
|
|||||
|
|
|||||
|
Coil Over Kit Parts |
|||||
|
|
|||||
|
3001 - The Genesis "TwistSeat" cone - $22.00 |
|||||
|
Fits all Genesis Series Shocks with 2 1/2 Springs. |
|||||
|
|
|||||
|
|
|||||
|
3200 - The Genesis "TwistSeat" cone - $22.00 |
|||||
|
G6-G7-G8 Series Shocks with 1 7/8 Springs. |
|||||
| The Genesis 3001 & 3200 "TwistSeat" cone spring seat features a unique twist-on feature available only from Genesis. Always centered and secure. No clips or pins. | |||||
|
|
|||||
|
|
|||||
|
The Genesis 3000 - spring seat nut |
|||||
|
G0, G1,G2,G3 Series Shocks with 2 1/2 Springs - $22.00 |
|||||
|
The Genesis 3350 - spring seat nut |
|||||
|
G6,G7,G8 Series Shocks with 1 7/8 Springs - $22.00 |
|||||
| The Genesis 3000 & 3350 spring seat nut is drilled for a spanner wrench, indexed in two separate areas and locks in place using only a wire tie. | |||||
|
|
|||||
|
Shock Extensions |
|||||
|
|||||
|
3010 -1" Shock Extensions for GD,GS0,GS1,G0, G1, and G6 series - $16.00 |
|||||
|
4010 -1" Steel Shock Extensions for GD,GS0,GS1,G0, G1, and G6 series - $16.00 |
|||||
|
|
|||||
|
3020 - 2" Shock Extensions for GD,GS0,GS1,G0, G1, and G6 series - $18.00 |
|||||
|
The Genesis shock extension is machined from high strength billet aluminum and anodized black with a 1" hex for tightening. |
|||||
|
4020 - 2" Steel Shock Extensions for GD,GS0,GS1,G0, G1, and G6 series - $18.00 |
|||||
|
|
|||||
 |
|||||
| 3050 - Genesis Aluminum eye ring with bearing - $32.00 | |||||
| 4050 - Genesis Steel eye ring with bearing - $20.00 | |||||
| 3040 - Genesis Bearing with 2 snap rings - $13.00 | |||||
|
|
|||||
|
Urethane Foam Bumper's |
|||||
 |
|||||
|
3101-S - 2.3" Soft Urethane Foam Bumper - $18.75 |
|||||
|
3101-M - 2.3" Med Urethane Foam Bumper - $18.75 |
|||||
|
3101-H - 2.3" Hard Urethane Foam Bumper - $18.75 |
|||||
|
3102-S - 1.9" Soft Urethane Foam Bumper - $18.75 |
|||||
|
3102-M - 1.9" Medium Urethane Foam Bumper - $18.75 |
|||||
|
3103-S - 3"Soft Urethane Foam Bumper - $18.75 |
|||||
|
3103-M - 3" Medium Urethane Foam Bumper - $18.75 |
|||||
|
3103-H - 3" Hard Urethane Foam Bumper - $18.75 |
|||||
| 3110 - Linear Bump Stop Set - $75.85 | |||||
| 3140 - Bumper Cup - $15.00 | |||||
|
|
|||||
|
|
|||||
|
3700 - Spring Connector Sleeve for G0,G1,G2,G3 series - $25.00 |
|||||
|
The Genesis 3700 spring connector sleeve for double spring set-ups. |
|||||
|
3701 - Spring Connector Sleeve for G6,G7,G8 series - $25.00 |
|||||
|
The Genesis 3701 spring connector sleeve for double spring set-ups. |
|||||
|
|
|||||
 |
|||||
| 3711 - Big Body Stop Nut Kit - $41.50 | |||||
 |
|||||
| 3721 - Small Body Stop Nut Kit - $41.50 | |||||
|
|
|||||
|
|
|||||
|
3705 - OD Take-Up Spring Connector for G0,G1,G2,G3 - $25.00 |
|||||
|
The Genesis 3705 spring connector sleeve for Take Up Springs. |
|||||
|
|
|||||
|
|
|||||
|
3750 - Bird Cage Shock Clevis - $66.00 |
|||||
|
The Genesis 3750 bird cage shock clevis fits most bird cages and eliminates binding of the shocks on the rear. |
|||||
|
|
|||||
|
|
|||||
|
3900 - Gas Filler Tool w/ 0 to 160 Gauge - $100.00 |
|||||
|
The Genesis 3900 gas filler tool is black anodized billet aluminum and has a liquid filled gauge with a range of 0-160 PSI. |
|||||
|
3920 - Gas Filler Tool w/ 0 to 300 Gauge - $110.00 |
|||||
|
The Genesis 3920 gas filler tool is black anodized billet aluminum and has a gauge with a range of 0-300 PSI. |
|||||
|
3960 - Gas Filler Tool w/ 0 to 60 Gauge - $110.00 |
|||||
|
The Genesis 3900 gas filler tool is black anodized billet aluminum and has a liquid filled gauge with a range of 0-60 PSI. |
|||||
|
3990 - Non-Schrader Valve Re-Charge Tool Kit - $195.00 |
|||||
|
The Genesis 3990 gas filler tool is made for non-schrader valve shocks and has a gauge with a range of 0-300 PSI kit comes with 5 replacement ports. |
|||||
|
|
|||||
 |
|||||
| ST-33 - Genesis Shocks Spanner Wrench - $10.00 | |||||
|
|
|||||
|
Steel Shock Parts |
|||||
|
|
|||||
 |
|||||
| 3610 - Genesis Steel Shock Coil – Over Tube Snap Ring - $2.00 | |||||
 |
|||||
| 3001 - Genesis "TwistSeat" Cone - $22.00 | |||||
 |
|||||
| 4008 - Steel Shock Coil – Over Tube - $20.00 | |||||
 |
|||||
| 4009 - Steel Shock Spring Seat Nut - $20.00 | |||||
|
|
|||||
|
|
|||||
|
Genesis Shock Coil-Over Covers |
|||||
| The Genesis Shocks coil-over covers come in Sliver with the Genesis logo in 2 sizes 14" and 17" & 20". Sold as pairs. | |||||
| 3814 - 14" - $34.50 | |||||
| 3817 - 17" - $34.50 | |||||
| 3820 - 20" - $34.50 | |||||
|
|
|||||
|
|
|||||
|
Shock Savers - $26.95 |
|||||
|
Shock Saver is a plastic/nylon sleeve that goes over the threaded body shock and inside of the coil spring preventing the coil spring from rubbing on the shock body. Available in Black. |
|||||
|
|
|||||
|
Genesis Shocks Decals |
|||||
|
|
|||||
|
3-1/2" x 8" Product Decal |
|||||
|
|
|||||
|
5" x 14" Product Decal |
|||||
|
|
|||||
|
Genesis Shocks Patch |
|||||
|
|
|||||
|
2-3/4" x 4"Small Iron-On Logo Patch |
|||||
|
|
|||||
|
Genesis Shocks Simpson Fire Suit |
|||||
|
|
|||||
| Genesis Shocks Simpson Fire Suit | |||||
| Genesis Racing Shocks Logo Front and Back | |||||
|
All uniforms will be constructed of Gabardine Nomex
Fabric and will feature the following comfort options: |
|||||
| Click on photo for larger image | |||||
| Black and Silver - $700.00 | |||||
|
Options |
|||||
|
Genesis Fire Suit 2-Piece Suit Up-Charge add - $35.00 |
|||||
|
Genesis Fire Suit Back Gusset Up-Charge add - $50.00 |
|||||
|
Genesis Fire Suit Arm Restraints Up-Charge add - $50.00 |
|||||
|
Genesis Fire Suit Sateen Material Up-Charge add - $150.00 |
|||||
|
Order Form.....click here |
|||||
|
|
|||||
|
|
|||||
|
|
|||||
|
Genesis Shocks |
|||||
|
5020 Old Ellis Point - Suite 200 |
|||||
|
Roswell, Georgia 30076 |
|||||
|
678-659-9454 |
|||||
|
Fax 678-659-9457 |
|||||
|
e - mail - Genesisinfo@Genesisshocks.com |
|||||
|
Copyrighted © 2006-2010 |
