Steel Non-Bulb Non Adjustable Shocks - $155.00
 

The GS0 is a mono-tube, non-adjustable gas shock absorber.  It's available in 7" and 9" stroke and any possible valving or split valving. 

 

Features

  • Large 48mm bore for maximum control.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.
  • Solid Carbo-Nitrided Alloy shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index shock absorber oils.
  • Double checked  low-speed valving design with ± .00004" precision components.

The GS0 is completely rebuildable, and revalvable.

With or without Schrader Valves according to your Rules.

  • Coil Over Kit for GD,GS0 and GS1 series with 2 1/2 springs - part number 3600

  • Coil Over Kit for GS0 and GS1 series with 5" ID springs - part number 3650
Series Extended Length Compressed Length  Travel Weight
GS0 - 7" 19 1/4 12 3/4 6 1/2 inch #3.7
GS0 - 9" 23 1/4 14 3/4 8 1/2 inch #4.2

Building Winners And Champions One Race At A Time!

Approved!

Austin Kaplan

Kevin Sather
 

Ben Stephens

Dave Hess Jr.
 

Steve Bernier

Éric Lefebvre

2008 Autodrome Drummondville Speedway

2008 Autodrome - Granby Speedway

Dirt Modified Sportsman Champion

Dirt Modified Sportsman Champion

  • 3600 Coil Over Kit for GD, GS0 and GS1 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for GS0 and GS1 series shocks.

  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1" or 2" shock extensions in some applications.

  • Also available in the GS0 and GS1 series are standard valvings like GS075, GS076, GS094 and GS095 and so on.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS0194-0 or GS195-0 for Sweeping corner tracks and GS0196-0 or a GS0196-2 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS0190. Also available in GS1 & G1 series. Adjust your gas pressure accordingly any where from 50 psi to 200 psi.

 GD|GS0||GS1|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted © 2006-2010