Steel With Bulb - Double Adjustable Shocks - $475.00

Genesis Adjustable Instructions Sheet

Available With or Without a Schrader Valve To Comply with Rules

The GS3 series is now approved

for USMTS,USRA and Wissota Series use !

Adjustable Shocks.

The GS3 is a steel mono-tube, adjustable gas shock absorber.  It's available in 7" and 9" stroke and any possible valving.  It has a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.

Features

• The GS3 has the largest true rebound and compression range of adjustments. 3 to 8 on Rebound and Compression standard,  Also available in 3 to 16.

• Completely independent rebound and compression adjustment.

• Large 48mm bore for maximum control.

• Positive stainless steel no-drag scraper to keep any dirt and debris out.

• Hollow chrome-moly shaft.

• Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.

• The finest High quality, High viscosity index shock absorber oils.

• Double checked  low-speed valving design.

• The GS3 is completely rebuildable - revalvable.

• Available With or Without a Schrader Valve To Comply with Rules.

The GS3 is completely rebuildable, and revalvable.

With or without Schrader Valves according to your Rules.

To Adjust the Compression or Rebound

To Adjust: Turn knob until arrow points to desired valve setting.

Compression Side Adjustment

Rebound Side Adjustment

Now Available!

Remote Adjuster Cable For Adjustable Shocks.

• 3600 Coil Over Kit for GD,GS1, GS3 and GS0 Series Shocks is required for coil over applications with 2 1/2 springs.

• 3675 Coil Over Kit for 5" Springs for GD,GS1, GS3 and GS0 Series shocks.

• We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

• Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS194-0 or GS195-0 for Sweeping corner tracks and GS196-0 or a GS198-3 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS190. Also available in G1 series. Adjust your gas pressure accordingly any where from 50 psi to 200 psi.

Shock Parts and Accessories

2012 Genesis Racing Shocks Catalog

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

Genesis Camair Products

 GD|GS0||GS1|GS2|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GB1|GB2|GB3 Base Valve Shock Series

Building Winners And Champions One Race At A Time!

Genesis Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted © 2006-2011