Non Adjustable Shock Absorbers
$349.00

The G1 is a mono-tube, non-adjustable gas shock absorber.  It's available in 5" - 6" - 7" -8" and 9" stroke and any possible valving or split valving.  It has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.
 

Features

  • Large 48mm bore for maximum control.

  • Largest 75mm built on gas reservoir.

  • High strength 10 turns per inch external threads with adjusting nut locking grooves.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.
  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index shock absorber oils.
  • Proprietary Dynamic Gas Pressure Control, keeps pressure low while supporting compression valve values.
  • Double checked  low-speed valving design with ± .00004" precision components.
 

The G1 is completely rebuildable, and revalvable.
 

  • Coil Over Kit for G1 series with 2 1/2 springs - part number 3500
 
Series Extended Length Compressed Length  Travel Weight
G1 - 5" 15 3/4 10 3/4 5 inch #2.4
G1 - 6" 17 3/4 11 3/4 6 inch #2.6
G1 - 7" 19 3/4 12 3/4 7 inch #2.8
G1 - 8" 21 3/4 13 3/4 8 inch #3.0
G1 - 9" 23 3/4 14 3/4 9 inch #3.2

 GD|GS0||GS1|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.
 

Shock Parts and Accessories

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

1

Copyrighted © 2006-2010